ConfigMgr 2012 / SCCM 2012 SP1 Step by Step Guide Part 13: Operating System Deployment - Deploying new computers
Back to main menu
Parts 8 -12 described how to create a complete OSD solution. Part 13 now describes the process of actually building the computers.
Remember that our task sequence has been deployed to "Unknown Computers". If your computer is already known to Config Mgr you must first delete it from the database. It could help if you first ran the Config Mgr report to locate a particular MAC address
Turn on computer and press F12 for network boot (or for one time boot menu)
Boot from Network Controller
When PXE point is located via DHCP you are prompted to press F12 to continue. You don't have much time here (this is a BIOS issue - not Config Mgr) so press F12 quickly
Boot image is downloaded and the computer restarts into Windows PE
Enter your PXE password
Choose your task sequence
Double click on OSDComputerName
Enter required computer name and click OK
Click Next to continue (no further input is required)
Drive is formatted
Image file is downloaded
Image file is applied to the formatted drive
Parts 8 -12 described how to create a complete OSD solution. Part 13 now describes the process of actually building the computers.
Remember that our task sequence has been deployed to "Unknown Computers". If your computer is already known to Config Mgr you must first delete it from the database. It could help if you first ran the Config Mgr report to locate a particular MAC address
Turn on computer and press F12 for network boot (or for one time boot menu)
Boot from Network Controller
Boot image is downloaded and the computer restarts into Windows PE
Enter your PXE password
Choose your task sequence
Double click on OSDComputerName
Enter required computer name and click OK
Click Next to continue (no further input is required)
Drive is formatted
Image file is downloaded
Image file is applied to the formatted drive
No comments:
Post a Comment